Describe the front and back of a design

Give the front and the back their own paragraphs so both sketch views match your design.

Every sketch from Sketch Studio shows your design twice: a Front view and a Back view, side by side. Both come from one description, so the clearer you are about each side, the better the two views match your design. This guide shows how to write both, and how to change one side later without touching the other.

Why the back needs its own words

Sketch Studio always makes both views. If you only describe the front, the back has to be worked out from it, and details like a low back, a back zip, straps or a back print may not appear the way you imagine. Sketch Studio's own tip says it plainly: "Write 400 words or more, and describe the front and back separately."

Write the front and back as two paragraphs

There's one box, Describe the design details, so give each side its own paragraph and start each one with a label.

  1. Open Sketch Studio (Create > Sketch Studio).
  2. In Describe the design details, start with a short overview of the design: what it is, its fit and its mood.
  3. Write a paragraph that starts with FRONT: and covers:
    • Neckline, collar and straps.
    • Front closures: buttons, a front zip, wrap ties.
    • Seams, darts, panels and pockets on the front.
    • Any print or graphic on the front, and where it sits.
  4. Write a paragraph that starts with BACK: and covers:
    • The back neckline: high, scooped, low or open.
    • Back closures: "invisible centre back zip", "keyhole with a button".
    • Straps and how they cross or attach.
    • Back details: a vent, a train, a bow, a back yoke, a back print.
  5. Finish with anything that's the same on both sides, such as the hem and the length.

Tip: Even a plain back deserves one line. "BACK: plain, with an invisible centre back zip and a straight hem" stops the sketch from inventing details.

An example

"A fitted satin midi slip dress for evening, softly draped, minimal and modern.

FRONT: Cowl neckline that falls to just above the bust, 1 cm adjustable spaghetti straps, bias cut so the fabric skims the body, no seams across the front.

BACK: Low scooped back to the waist, the straps cross once in the centre and attach at the waistline, invisible zip on the left side seam.

Midi length to mid-calf with a straight hem on both sides."

For more on what to include in each paragraph, see Write a strong design description.

Use references for each side

If you have photos, add them in References and label them Front or Back so each one guides the right view. See Use reference images for prints, textures and colours.

Change only one side later

When your sketch is ready, you can change the front or the back on its own in Edit Design:

  1. Open the design and click Edit Design.
  2. Choose Words.
  3. Describe one change, for example "add a keyhole opening at the centre back".
  4. Under Scope, choose:
    • Front only to change only the front view.
    • Back only to change only the back view.
    • Whole garment to change both.
  5. Click Generate Updated Design (2 credits).

The full guide is Make precise changes with Edit Design.

Why it matters later

The front and back you describe carry through to everything you make from the sketch:

Common mistakes

  • Only describing the front. Always add a BACK: paragraph.
  • Mixing sides in one sentence. "V-neck with a zip and a bow" doesn't say where the zip and bow go. Put each detail under FRONT: or BACK:.
  • Using Whole garment for a back-only change. Choose Back only so the front stays exactly as it is.