Add your logo with Edit Design
Place, move and resize your logo on a sketch for free, then make it look printed if you like.
The Logo tool in Edit Design puts your logo or any graphic onto a sketch exactly where you want it. Placing it is free. If you'd like it to look printed into the fabric, there's an optional AI step for 2 Credits. This guide walks through both.
Before you start
- Have your logo as a PNG (transparent backgrounds work), JPG or WEBP, up to 8 MB. The tool shows this as "PNG (transparency supported), JPG or WEBP · max 8MB".
- A transparent PNG gives the cleanest result, because there's no box around your logo.
- Make your other design changes first if you can, then add the logo last.
Open the Logo tool
- Open the sketch you want to brand. You'll find it under Recent Designs on your dashboard or in History.
- Click Edit Design.
- Click Logo.
The tool works on the view you're looking at. Its help line reads: "Place a logo or graphic directly on the front view. Drag to move, pull the corner to resize."
Place your logo
- Click Upload a logo or graphic and choose your file.
- Drag the logo to where you want it on the garment.
- Pull a corner to make it bigger or smaller.
- Try as many positions as you like. Nothing is saved until you confirm.
- Happy with it? Click Confirm placement · free.
You'll see Logo applied and a note that it was saved as a new version with no Credits used. Your original is kept, and the new version appears in the version strip.
Good to know: Use Replace to swap in a different image, or Remove logo to start again.
Make it look printed (optional)
A placed logo sits flat on top of the sketch. To make it follow the folds, light and texture of the fabric, use one of these instead of the free button:
- Make it look printed · 2 credits runs an AI edit on a placed logo.
- Confirm & make it look printed · 2 credits saves the placement and makes it look printed in one step.
The plain placement is always free. Only the printed look costs Credits. See How Credits work.
Put a logo on the back too
The logo goes onto the view you're looking at. To brand the back as well:
- Place your front logo first, but don't confirm yet.
- Use the Front / Back switch at the top of the editor to show the back.
- Click Upload a logo or graphic and place the back logo.
- Click Confirm placement · free. Both views are saved together in one new version.
For other changes that should affect only one side, see Describe the front and back of a design.
Tips for a clean result
- Crop tightly. Extra empty space around the logo makes it harder to position.
- Keep it simple. Bold shapes read better than very thin lines or tiny text.
- Check the size. A chest logo is usually small. Compare it with the garment before confirming.
Tip: Don't type your logo text into the Words tool. Text and fonts are hard for AI to draw. Upload the logo here instead.
What happens next
Your logo version is a normal design version. You can use it for:
- E-Commerce photos on models.
- A Tech Pack, where the Print tab covers print and graphic placement.
- More changes in Edit Design.
Common mistakes
- Uploading a huge photo of the logo. Files over 8 MB are refused. Export a smaller PNG.
- Using a JPG with a white box. On a coloured garment the box shows. Use a transparent PNG.
- Paying when you didn't need to. If a flat placement looks right, Confirm placement · free is all you need.